Awards & Engraving

2019 Custom Gift Annual

Issue link: https://nbm.uberflip.com/i/1105999

Contents of this Issue

Navigation

Page 49 of 100

A&E MID-MAY 2019 • a-e-mag.com 47 A&E A&E MID-MAY 2019 • a-e-mag.com 47 4 Lint roll the mitt's image area, place mitt face-up on the Teflon, cover with protective paper, and pre- press for 10 seconds. 5 Secure the transfer to the mitt using DyeTrans Pro Spray (do not use heat tape and do not wrap transfer around the mitt as it will ruin the silver surface). 6 Place the mitt face-up (attached transfer face-down) on the Teflon, cover with protective paper, and press for 50 seconds at 400 F with heavy pressure. 7 Carefully remove the mitt from the press and let cool. Step Three. Step Four. Step Five. Step Six. The finished oven mitt. IMAGES COURTESY CONDÉ SYSTEMS

Articles in this issue

Links on this page

view archives of Awards & Engraving - 2019 Custom Gift Annual