Awards & Engraving

2019 Custom Gift Annual

Issue link: https://nbm.uberflip.com/i/1105999

Contents of this Issue

Navigation

Page 95 of 100

A&E MID-MAY 2019 • a-e-mag.com 93 STEPS: 1 Cut your transfer so that it is slightly larger vertically than the mug. 2 Position the substrate onto the transfer. 3 Tape two ends of the transfer near the handle of the mug using heat tape. 4 Wrap a piece of scratch paper around the transfer and mug; tape if necessary. 5 Place the aluminum tool into the mug. 6 Place the mug and tool into the center of the mug press. 7 Close the mug press using the mug heat press settings listed. 8 Remove items from the press and immediately remove the alu- minum tool. Use heat-resistant gloves if necessary — the items will be very hot. 9 Remove transfer and scratch paper and let cool. No need to put in water. A&E A&E MID-MAY 2019 • a-e-mag.com 93

Articles in this issue

Links on this page

view archives of Awards & Engraving - 2019 Custom Gift Annual