July '22

Issue link:

Contents of this Issue


Page 84 of 104

HOW-TO/TUTORIAL Engrave Silicone Tumbler Wraps C O U R T E S Y O F J O H N S O N P L A S T I C S P L U S Images courtesy Johnson Plastics Plus O ffer your customers personalized drinkware without needing a rotary attachment for your laser! Tumblers with removable silicone sleeves can be easily customized in any laser, and here are the simple steps you need to follow to make that happen. 1. Place the silicone sleeve in the laser. 2. Use tape or a jig to hold it flat. You can also use a custom jig to position and hold the sleeve flat. 3. Adjust the focus of the laser to the surface of the sleeve. 4. Position the artwork and engrave using the suggested settings for your laser. Power: 40% Speed: 80% Resolution: 600 DPI for a 60W laser 5. When finished, remove the sleeve and clean it with soap and water. You can find artwork templates for the sleeves at Don't miss the how-to video on the JPPlus YouTube channel: 7 8 C U S T O M G I F T A N N U A L 2 0 2 2 G R A P H I C S - P R O. C O M CGA

Articles in this issue

Links on this page

view archives of GRAPHICS PRO - July '22