Awards & Engraving

June '18

Issue link: https://nbm.uberflip.com/i/977700

Contents of this Issue

Navigation

Page 41 of 84

By Sara Nicholson, Unisub 1) Peel the film from the substrate. Wipe the coated surface with a microfiber cloth or use canned air (if needed) to elimi- nate any dust or other particles. 2) Apply substrate coating side down on top of your printed transfer paper. 3) Maintain an appropriate bleed for your substrate; use heat-proof tape to attach the substrate to the transfer paper. 4) Wrap the transfer around the sides of your substrate and apply tape. 5) Flip taped transfer paper/substrate upside down (substrate coating will be face up at this point but covered from view by the transfer paper) and place it in the heat press between the two layers of blowout paper/tissue paper. 6) Make sure that your heat press is set at 400 F; the size of the product will determine the time to press. How to Sublimate Wood A&E JUNE 2018 • a-e-mag.com 39 A&E Get involved in editorial opportunities for A&E each month! Call Cassie Green at 720.566.7278 or email cgreen@nbm.com

Articles in this issue

Links on this page

view archives of Awards & Engraving - June '18